It is one of the most common questions about home security: if I mount the motion sensor inside, will it still catch an intruder moving around outside the window? Or the reverse — will the neighbor’s cat strolling past the patio doors set off the alarm? The answer is refreshingly clear-cut once you know which sensing technology you are dealing with, because “motion sensor” covers two completely different physical principles, and glass treats them oppositely.
The short version: heat-based sensors are blind through glass, while radio-based sensors see straight through it. Everything about placement, false alarms, and choosing the right sensor for a glass-heavy space follows from that one fact.
Why PIR Sensors Cannot See Through Glass
Passive infrared (PIR) sensors — the kind in most alarm panels, porch lights, and indoor security sensors — detect the far-infrared radiation that warm bodies emit, in wavelengths around 8 to 14 micrometers. Ordinary window glass is essentially opaque at those wavelengths: it absorbs the infrared rather than transmitting it. A person walking outside a closed window is, to a PIR sensor indoors, thermally invisible. The glass might as well be a brick wall.
This is not a sensitivity problem you can fix with a better sensor; it is fundamental physics. The same absorption is why greenhouses trap heat and why thermal cameras cannot see through windows either. Tinted, low-E, and double-glazed windows block infrared even more thoroughly than plain single panes, so modern energy-efficient glazing only strengthens the barrier. If your security plan depends on an indoor PIR sensor detecting humans outside the glass, the plan has a hole in it — one of the classic detection blind spots that sensors simply cannot see through.
Why Microwave Sensors Can
Microwave motion sensors work on a different principle: they emit low-power radio waves (typically around 2.4, 5.8, or 10.5 GHz) and listen for the Doppler shift in the reflections from moving objects. Glass is largely transparent to these frequencies, so a microwave sensor mounted indoors will happily detect movement on the other side of a window — and, inconveniently, movement in the next room, the hallway, or outside the building entirely.
This see-through ability is a double-edged sword. It makes microwave sensors useful for applications like detecting motion behind partitions or inside vehicles, but it is also why they are notorious for false alarms in alarm systems: rain hammering a window, a ceiling fan, or someone walking past outside can all trigger them. Installers compensate with sensitivity adjustments and range limiting, but the physics cannot be switched off.
What This Means for Placement
For indoor security, the rule is simple: PIR sensors go inside, aimed at interior spaces, never pointed at windows expecting to cover the yard. If you want the approach to the house covered, the sensor belongs outside — in a weatherproof housing, aimed across the approach path. Pointing an indoor PIR sensor at a big glass patio door does not extend your coverage outward; it just wastes a sensor.
The storefront problem
Retail shops face the mirror-image issue: they want to detect customers approaching the glass entrance from inside. A PIR sensor behind the glass will not see them coming. The usual solutions are a microwave-based sensor, a dual-tech unit with the microwave element doing the through-glass work, or simply mounting the sensor outside above the door.
Glass as a false-alarm source
Glass causes trouble in the other direction too. Sunlight striking a PIR sensor directly can saturate its element; rapid heating of surfaces near the sensor — a sunlit curtain suddenly billowing — can mimic a moving heat signature. And blind zones in motion detection get worse near glass because reflections and drafts create exactly the kind of ambiguous signals that confuse single-technology sensors. Good installers keep PIR sensors out of direct sun paths and away from HVAC vents blowing across windows.
Choosing the Right Technology for Glass-Heavy Spaces
Match the sensor to the side of the glass you care about. Need to detect people outside while the sensor stays inside? Use microwave or dual-tech and accept the tuning work: start sensitivity low and raise it only until the desired outdoor zone is covered, then verify that indoor-adjacent areas like hallways are not leaking into the detection field. Need to ignore everything outside the window? PIR is naturally perfect — the glass does the filtering for free, which is why indoor PIR sensors rarely false-alarm on outdoor movement.
Dual-technology sensors deserve special attention here because their two halves disagree about glass. In most dual-tech designs, both the PIR and the microwave element must trigger for an alarm. Behind a window, the PIR half will never fire on outdoor movement, so the unit as a whole behaves like a PIR sensor toward the outside — effectively blind beyond the glass — while retaining microwave sensitivity indoors. That makes dual-tech an excellent choice for a glass-walled room where you want indoor coverage with zero outdoor false alarms: you get the microwave’s resistance to indoor dead spots without its habit of seeing through walls and windows. Conservatories, glass-walled offices, and patio doors are the places where this choice matters most, and where a surprising number of DIY installations go wrong by assuming all motion sensors behave alike.
Ultrasonic Sensors and Glass: A Middle Case
Ultrasonic motion sensors, which bounce high-frequency sound off the room and listen for Doppler shifts, sit between the two extremes. Glass reflects a large share of ultrasonic energy rather than transmitting it, so a sensor on one side of a window gets a much weaker picture of the other side — but not zero. In practice, an ultrasonic sensor pressed near glass may still pick up large, close movements beyond it, while the same sensor across the room will not. This partial sensitivity makes ultrasonic the least predictable of the three technologies around windows: it neither cleanly ignores the outside like PIR nor reliably covers it like microwave. For security applications that demand certainty, that unpredictability is a reason to avoid ultrasonic near large glass areas rather than rely on it.
Testing Your Own Setup
If you are unsure what your sensor actually covers, test it empirically instead of guessing. For a PIR sensor, have someone walk slowly across the area you want covered while you watch the sensor’s indicator LED — most have a walk-test mode that flashes on detection. Check the far corners, the edges of the claimed coverage pattern, and crucially, the other side of any glass: walk outside the window and confirm the sensor stays dark. For microwave or dual-tech sensors, repeat the test on both sides of the glass and adjust sensitivity until indoor movement triggers reliably while outdoor movement does not — accepting that heavy rain or a large vehicle very close to the window may still occasionally trip a microwave element, since radio waves do not respect property lines.
One more practical note: glass itself changes over the day. A window that is transparent to visible light at noon becomes a mirror at night when the interior is brighter than the exterior, and low winter sun can heat the glass enough to create infrared gradients a sensitive PIR might notice. If a sensor near glass behaves differently between day and night, the window — not the sensor — is the prime suspect. Logging when the odd behavior occurs for a few days usually reveals the pattern: tied to sunrise and sunset, it is thermal; random through the night, look for heating-system drafts, newly hung reflective surfaces, or simply a failing sensor element instead.
Frequently Asked Questions
Can my indoor security camera see motion through a window?
A camera can, because it uses visible light, which glass transmits. But its built-in PIR motion sensor cannot — so at night, when the camera relies on the PIR to wake up, activity outside the window may be missed. Many people move the camera outside or disable the window glare problem instead.
Can I put a motion sensor behind glass to protect it from weather?
Only if it is a microwave or dual-tech sensor. A PIR sensor behind glass is blind to the outside, so weatherproofing it that way defeats its purpose. Use a proper outdoor-rated housing instead.
Do glass doors trigger alarm motion sensors?
PIR sensors are not triggered by movement visible through glass, since the infrared does not pass through. Microwave sensors, however, can be triggered by movement on either side of the glass.
Which sensor type is best for a shop entrance with glass doors?
A microwave-based or dual-technology sensor mounted to cover the approach, or a sensor mounted outside above the door. A PIR sensor behind the glass will not detect approaching customers.
Why does my PIR sensor false-alarm near windows?
Direct sunlight on the sensor element, rapid heating of nearby surfaces, and warm air currents from vents near windows can all mimic the infrared changes of a moving person. Repositioning the sensor out of the sun path usually fixes it.